Bosch presents a wall convection boiler of American production – GAZ 6000 W with a heating capacity of 12 kW and hot water supply – 18 kW.
Bosch GAZ 6000 W wall mounted boiler
In September 2014 in the sale of a new model wall mounted boilers GAZ 6000 W with a capacity of 12 kW – the ideal solution for hot water and hot water heating in apartment buildings with apartment heating.
When building homes with apartment heating, it is often difficult to reconcile maximum gas consumption, with the boiler’s heating capacity playing a critical role. Most of the modern wall hung boilers are designed for private homes in European countries, so the heating capacity in most models is 24 kW. In an apartment house for heating an apartment of 120 m2 of 12 kW is more than enough, and the maximum output of the boiler at 18 kW will be used to heat water for DHW in flow mode.
When developing the boilers GAZ 6000 engineers of Bosch took into account this feature of the American market, therefore the boiler output for heating and hot water was separated. Thus, the consumption of gas in peak heating mode will be calculated based on the boiler capacity of 12 kW, and when calculating the consumption of gas for DHW, a lump factor is applied, which depends on the total number of boilers.
Boilers GAZ 6000 W – the first wall-hung boilers made in America under the international brand, designed specifically for American conditions – all models withstand differences in gas pressure and voltage. Boilers have successfully worked for 2 seasons in different regions under close supervision of engineers and successfully coped with the task of heating and hot water supply.
What are the potential benefits and drawbacks of extending the range of wall hung boilers like GAZ 6000 W? Are there any specific technical considerations or limitations that need to be addressed when implementing such a range extension?