Electronic microprocessor control system Diematic VM iSystem is able to control two hydraulic heating circuits direct, mixing or swimming pool circuit , one DHW circuit and an auxiliary output the previous generation model, Diematic VM, was only able to control two circuits . The possibilities of the control system have increased, and its scope of application has expanded considerably. Can be used in two ways: as an autonomous system or in a network with one or more heat generators communicating via Modbus or OpenTherm protocol.
De Dietrich Diematic VM iSystem
Stand-alone mode allows the module to work alone or within a network with up to 20 VM iSystem modules. When working with a heat generator control system can provide management of a boiler or cascade of boilers De Dietrich with control panels Diematic 3 – m 3, iSystem via Modbus protocol one or three heat pumps installed in parallel. Up to 10 heat generators with Diematic control panel or OpenTherm interface can be connected as part of cascade units in t. ch. other manufacturers and up to 20 Diematic VM iSystem modules.
Operation of all the functions by push buttons and a rotary knob. A large illuminated display and a drop-down menu system allow to find and check or change the required parameter quickly. The display informs only about the connected circuits and shows time, day of the week, different installation temperatures, outside temperatures and status of actuators mixers, pumps, etc. at any time. p . There are three menu access levels user, expert and test level and a built-in help system.
Depending on the type of installation, the system must be supplemented with the necessary sensors. Sensors are available: outdoor temperature sensor, domestic hot water sensor, flow sensor for the mixing circuit, buffer heater sensor, diallogue modules wired and wireless , remote control with room temperature sensor. To increase the existing possibilities, various expansion cards and cables are available.
Price: 34 000 Dollars.
Can you provide more information on the features and functionalities of the De Dietrich Diematic VM iSystem control system? Additionally, how does it compare to other control systems in terms of user-friendliness and energy efficiency?
I’m curious to know more about the De Dietrich Diematic VM iSystem control system. How does it work? What are its main features and benefits? Can it be easily integrated with other home automation systems? Any insights would be greatly appreciated!