When choosing heating equipment for a private home, designers take into account many parameters, among them – the climate zone, the area of the room, the number of occupants, the thermal capacity of the boiler and the material from which it is made, the type of coolant and fuel, t.d. But still the main factors are economic efficiency of the project, as well as the comfort and reliability of all systems. Therefore, first of all, the available energy carriers and their costs are analyzed. In the presence of gasification, as a rule, gas boilers are chosen: subject to certain conditions, they can save up to 35% of fuel per season. What makes it possible to achieve these figures?
Ariston condensing technology
Of course, you should understand that gas consumption depends on the size of heated house, weather conditions and temperature mode: the colder it is outside, the more fuel is needed. In addition, the model of the equipment plays a key role – because only the most modern condensing gas boilers can provide high efficiency. The fact is that in addition to energy for cooling flue gases, they use the energy of the steam transition to the liquid state and due to this condensation process get an additional 10-11% gain in efficiency, compared to traditional boilers.
Keep in mind that such high rates can be achieved if most of the time the heating system is operated in a mode where the return temperature is less than 55 ° C. One of the easiest ways to achieve low-temperature operation is an underfloor heating system. By the way, this solution is gaining popularity due to the increased comfort: the room is heated evenly from the bottom up, from the floor to the ceiling, while conventional radiators overheat the top of the room, underheating the bottom.
To make the system even more efficient, it is worth paying attention to new high-tech solutions. For example, the installation of sensors of external and internal temperature allows you to create weather-dependent mode. Simply put, when it gets warmer, the boiler regulates its operation, reducing power. This makes it possible not only to maintain a comfortable heat, but also to avoid overheating and unnecessary costs: overheating by only 1 ° C entails a 5-8% overpayment for fuel gas . In this case, installing a remote control panel – for example, Ariston Sensys with built-in temperature sensor, you can easily adjust the operation of equipment: for example, select a program in which the boiler reduces the burner power in the absence of household members and starts to heat in the normal mode for half an hour before their return. Gas is economically consumed and the life of the heat generator is increased.
Another way to save money is a modulating pump, which is now a standard feature of most innovative boilers. The optimal mode of operation of condensing models – 40 ° C/30 ° C. It is in this case, the heat loss and gas consumption is minimal, as there is less temperature difference between the heated room and the outside. When the temperature outside falls, the boiler heats harder to maintain the set temperature in the house. Thus, the optimal state of the system is disturbed, and the boiler goes out of condensing mode. Solve this problem by changing the flow of the coolant and, accordingly, its temperature – for this is the responsibility of the pump.
If the boiler has a non-modulated pump or the area of the house to be heated is large, it is also worth using modulated pumps for heat distribution. In this case, the ideal option would be devices that are linked by a single communication protocol with the boiler equipment. For example, multi-zone module MGM III EVO from Ariston can provide three loops, two of which can be used by the underfloor heating.
Taken together, these technological solutions can achieve huge savings when using condensing boilers. The advantages of this type of equipment are becoming more and more evident over time. If the condensing boiler runs on natural gas, it will pay for itself in 5-7 years, which may seem like a long time to many people. However, in the absence of gasification and work on liquefied gas your expenses will be more than justified after 2-3 years. In addition, the total cost will be much lower than the cost of other energy sources – electricity, fuel oil, etc.d.
How does Ariston’s condensing technology provide both comfort and savings when it comes to heating?
Ariston’s condensing technology offers both comfort and savings in heating. This technology recovers and utilizes the heat from the flue gases that are typically wasted in traditional heating systems. By capturing this heat, the condensing technology can achieve a higher level of efficiency. This means that more heat is produced for the same amount of energy input, resulting in increased comfort and reduced energy consumption. This improved efficiency also translates into cost savings for homeowners as they will experience lower energy bills. Moreover, the condensing technology reduces carbon emissions, making it more environmentally friendly. Overall, Ariston’s condensing technology offers a win-win solution by providing superior comfort while saving energy and money.
How can Ariston condensing technology provide both comfort and savings through advantageous heat?
Ariston condensing technology works by maximizing energy efficiency and capturing heat that would typically be lost in traditional heating systems. This means that not only can you enjoy a more comfortable and consistent level of warmth in your home, but you can also save on your energy bills. By using less fuel to achieve the same level of heat output, Ariston condensing boilers can provide significant cost savings over time. The technology also reduces harmful emissions, making it a more environmentally-friendly option. Overall, Ariston condensing technology offers a win-win solution for both comfort and savings.