Dyson engineers set out to redefine the device existing
Dyson Airblade Tap hand dryers
, reducing noise level, but retaining a high drying speed.
The result is the new Dyson Airblade Wash+Dry: a touchless dryer integrated into the mixer that dries hands in 14 seconds with air purified with a HEPA filter.
Multi-functional design helps save space in the bathroom and solves the problem of water getting on the floor as people walk from the sink to the hand dryer.
39% quieter
Dyson engineers have been able to reduce noise levels by reconfiguring the Dyson V4 digitally controlled motor on which all Dyson Airblade hand dryers are based. Reconfigured 1000W motor lets less air pass through, thereby reducing the noise produced by its movement. In this case, the holes through which the air flowed were narrowed from 0.8 mm to 0.55 mm. Thus, Dyson engineers were able to maintain a high rate of air flow, despite the reduction of its volume. In addition, the openings have been shaped in such a way as to reduce the loudness of the sound generated when compressed air comes into contact with the lower-pressure ambient air. Finally, the Helmholtz chamber in the location of the motor eliminates the high-frequency noise of the motor and improves its sound quality.
Reduced operating costs
The operation of the new Dyson Airblade Wash+Dry hand dryer costs 1,492 Dollars per year, while the cost of using the previous model was 2,089 Dollars per year. Dyson Airblade hand dryers are 78% more economical than other hand dryers and 99% more economical than paper towels.
Reduced CO
The new Dyson Airblade Wash+Dry hand dryer leaves a carbon footprint of 3.6g per drying, whereas the previous model produced 4g. Dyson Airbladeā¢ hand dryers produce a 79% lower carbon footprint than paper towels and some other hand dryers.
Uses 52% less water
The mixer of the new Dyson Airblade Wash+Dry hand dryer uses 1.9 liters of water per minute instead of 4 liters. Water starts flowing only when hands are under the tap.
The new Dyson Airblade Wash+Dry hand dryer is available in three configurations: Low, High, Built-in. All Dyson Airblade hand dryersTM equipped with HEPA filters that capture 99.95% of particles as small as 0.03 microns from the bathroom air.
Features
The new Dyson Airblade Wash+Dry hand dryer is available in three configurations: Low, High, Built-in. All Dyson Airblade hand dryers are fitted with HEPA filters, which capture 99.95% of particles as small as 0.03 microns from the bathroom air. The new Dyson Airblade hand dryer Wash+Dry is awarded the Quiet Mark from the Noise Abatement Society.
The warranty period is 5 years.
Measuring Acoustic Performance
The original Dyson Airblade Tap hand dryer makes 87 dB(A of noise, while the new Dyson Airblade Wash+Dry makes 80-81 dB(A . The decibel scale is non-linear, and itās hard to get an idea of what the human ear actually hears. For example, a 3 dB(A increase in volume doubles the sound pressure level, and a 10 dB(A increase increases it by a factor of 10. Thatās why noise reduction ratings for the new Dyson Airblade Wash+Dry hand dryer are presented on both a linear scale and a real perception by the human ear. Dyson Airblade Wash+Dry noise emissions reduced by 39%
i
. This means that the new model is 39% quieter to the human ear.
Is the new Dyson Airblade Wash+Dry hand dryer easy to use and efficient at drying hands quickly?
Is the Dyson Airblade Wash+Dry hand dryer easy to use, and does it effectively dry hands in a short amount of time?
Yes, the Dyson Airblade Wash+Dry hand dryer is easy to use and effectively dries hands in a short amount of time. With its sleek design and touch-free operation, users can simply place their hands in the dryer and it starts automatically. The powerful airflow and blade technology quickly remove water from hands, allowing them to dry in just a matter of seconds. Additionally, the integrated faucet and hand dryer combination make it convenient to wash and dry hands in one place, reducing the need for separate hand drying facilities. Overall, the Dyson Airblade Wash+Dry hand dryer offers a user-friendly experience and efficient hand drying performance.
Yes, the Dyson Airblade Wash+Dry hand dryer is easy to use and effectively dries hands in a short amount of time. Users can simply place their hands in the dryer and it starts automatically. The powerful airflow and blade technology quickly remove water from hands, allowing them to dry in just a matter of seconds. The integrated faucet and hand dryer combination make it convenient to wash and dry hands in one place, reducing the need for separate hand drying facilities. Overall, the Dyson Airblade Wash+Dry hand dryer offers a user-friendly experience and efficient hand drying performance.