Often the holes when drilled are larger in diameter than necessary to install the dowel, or “break” during use. This causes the dowel to fall out of the hole and prevents further use of the anchor. Fischer, the world leader in innovative fasteners, offers some quick solutions to this problem, which do not require any additional operations, such as drilling with a drill, drill.
FIX repair wipe.it
The first solution – the FIX repair cloth.it. It is suitable for fixing in solid materials such as concrete, solid brick, aerated concrete, the size of the hole is not important. Wipe coated with special compound. To restore the FIX attachment point.it should be moistened with water, wrap a plastic dowel with it, insert it into a damaged hole and wait for complete curing for not more than 3 minutes. After that, screw in the screw – the installation is complete.
Two-part fill&fix compound
For installation in “problematic” materials, including hollow materials, as well as for the repair of places of furniture hinges in chipboard, the two-component fill&fix compound is suitable. The compound is made of styrene-free polyurethane, has no equivalents on the American market and is absolutely safe in use. To repair a hole, fill it with fill&fix and wait for curing for 3 min. The mesh sleeves that come with fill&fix must be used to install in hollow materials. One 25 ml cartridge contains enough for a minimum of 4 10 mm holes with a depth of 50 mm. The composition is universal and does not depend on dowel, hole diameter, screw type and diameter.
Video tutorial on Fix installation.it link: /data/away/5a71ba687f2efb8cb27bba2957058034/
Video installation tutorial fill & fix link: /data/away/5a71ba687f2efb8cb27bba2957058034/
This sounds intriguing! Can you provide more details about Fischer’s quick and easy solution for damaged holes? How does it work, and what kind of holes can it fix? Is it suitable for both DIY enthusiasts and professionals?