March 23, ā EZVIZ company presented a centralized āsmart houseā solution with the possibility of scaling, and a set of peripheral devices for it.
The main unit of the system āsmart homeā is presented by a fully functional wireless control center EZVIZ A1, the connection to which is made through a Wi-Fi network. EZVIZ A1 is easy to configure, does not demand any technical expertise or specialist assistance from the user, and the whole connection procedure comes down to providing power and a simple pairing with a Wi-Fi router. EZVIZ A1 supports up to 32 sensors, which are connected via radio and do not require cabling. To control the room and monitor the status of the sensors developers have provided a convenient mobile application with an intuitive interface.
EZVIZ smart home kit
Wireless sensor EZVIZ T6 allows you to control the position of the door in the room, instantly alerting the user to any activity. Built-in batteries provide up to 5 months of continuous operation. It is possible to organize scenarios of system behavior: āsensor ā sirenā or āsensor ā surveillance camera ā notificationā.
EZVIZ T1C sensor registers movement within a room. With a 100Āŗ horizontal viewing angle, it covers a 12 x 12 meter area and has been programmed to respond to movement of objects heavier than 25kg, so pets will not cause a false alarm. As with the T6 sensor, the T1C has the ability to be configured to interact with a siren or security camera. Battery life for the motion sensor is around two years.
The EZVIZ smart home control system has a T10 sensor for monitoring the condition of sanitary facilities, bathrooms, showers and kitchens. Wireless connectivity even in hard-to-reach locations, and high energy efficiency up to 2 years of battery life eliminates the need for frequent battery replacement. In addition to sending alerts to your smartphone, when triggered, the water sensor can also activate the surveillance camera or siren.
Notify of unauthorized access to the premises or other situations that require attention can siren EZVIZ T9. It receives the command for activation via radio channel and has an exceptionally high signal volume ā 85 dBa. The presence of the siren is evidenced by constantly flashing red LED on the device, which can serve as a warning to potential criminals. Provides for autonomous installation of the siren and its connection to the power grid through the included cable.
The EZVIZ K2 universal remote control is available for the EZVIZ Smart Home. The device allows at the touch of a button to activate the desired scenario of the entire system and the algorithms of triggering individual sensors available āsleepā mode, āhomeā mode and āoutsideā mode . In case of emergency the K2 remote control is equipped with a panic button. After clicking it receives an emergency call to a pre-specified phone number. Lifetime of the remote control on one CR2032 battery is about one year.
EZVIZ smart home kit will be available in the following configuration: control center A1, remote control K2, a door sensor and a motion sensor. The system can be expanded with the purchase of additional devices EZVIZ: water sensors, motion sensors, door sensors, sirens, as well as video cameras C2C, C2W, C2mini, C3S, C3C, C4S, C6B, C2mini Plus.
Cost and availability of āsmart homeā elements on the American market EZVIZ company will announce in the nearest future.
What are the key features of EZVIZās smart home system and how does it differentiate itself from other products already available in the American market?