Every family knows the situation: for some months you were going to hang a new painting, but ended up with 5 minutes of drilling and another 20 minutes of vacuuming. Kä Kärcher has found a neat and effective solution. Dust collectorDDC50 sticks to any walls and collects dust while you drill.
DDC 50 dust collector
New features
The main beauty of the DDC 50 dust collector is the patented Vacuum-Container-Function, which enables it to be attached to all surfaces. Dust-free drilling is now possible in concrete, brick, stone and wood. The dust canister is securely attached to the wall and does not need to be held, so you can drill with both hands.
Appearance and technical features
The DDC 50 dust collector is easy to use because of its small size 160 x 80 x 40 mm and weight of 236 g including batteries and protective cap .
The hole is suitable for drill sizes up to 10mm.
The dust canister holds 22.6 cc³ dust. That’s enough for 10 holes with a 6 mm drill bit.
Running time with two 1.5 V AA batteries is 1 year or 25 minutes of operating time.
DDC 50 dust collector schematic
1. Mark where you want to drill.
2. Position the DDC 50 dust collector on the marked spot and insert the core drill.
3. Press the DDC 50 against the wall, turn it on, firmly press it down and release it. The DDC 50 will fit on the wall.
4. Drill with both hands.
5. Take the drill out of the hole and turn off the DDC 50. If necessary, turn on the vent button, then remove the DDC 50 from the wall.
6. Clean the dust collector.
The DDC 50 dust collector is available from Kercher Centers.
Can you provide more information about the Dust collector DDC 50? How does it effectively prevent dust while drilling? Is it compatible with all types of drills?