...

Breathe deep: The AEROPAC SN ventilator from German company SIEGENIA

Most city apartments are installed impermeable to outside air plastic windows, which impairs the functioning of natural ventilation. This results in more carbon dioxide and humidity in the room. This causes discomfort, as well as a negative impact on health and well-being. In addition, such an environment is favorable for the emergence of mold.

Air cleaners

Home appliances

The AEROPAC SN air cleaner from SIEGENIA, Germany

The stuffiness forces the occupants to open the shutters or window sashes in order to air out the rooms. But along with the outside air into the apartment penetrates the city noise, street dust, exhaust fumes, insects, poplar down and other allergens.

The Quiet Ventilator, a compact ventilation system that provides a controlled flow of fresh and clean air when the windows are closed. The device is equipped with a filter that prevents the penetration of harmful impurities. The device is installed next to the heating radiator so that in the cold season to provide heated air flow. In summer, it keeps the apartment pleasantly cool in combination with an air conditioner.

Comfort technology

It is recommended to install the ventilator in a bedroom or children’s room in order to create a favorable environment for proper rest and healthy sleep for adults and children. Ventilation system installation does not take more than an hour and does not require any special repairs. The only thing that cannot be done by yourself is to drill a neat hole in the wall for the ventilation pipe with a drilling tool.

Here is a step-by-step instruction on the example of air ventilator AEROPAC SN, made by German company SIEGENIA aeropac.su .

The basic package includes the charcoal filter, installation and operating instructions, drilling template, plastic duct tube 80 mm in diameter and 500 mm in length, decorative grill, as well as two dowel screws or nail plugs for attaching the unit to the wall.

1. the ventilating panel is installed at a height of 0.35 to 1.5 m from the floor level, next to the window and the radiator.

2. Place the template on the wall in the intended position and mark the center of the future ventilation duct. A steel anchor is driven into the wall to secure the frame and prevent it from deviating beyond the marks it will be covered by the device after installation .

3. Under the area of drilling, fix a polyethylene film and lower it into a container to avoid water to the wall.

4. The vacuum cleaner and the hose from the water pump are connected to the drilling machine, the core bit diamond circle drill is put on. With the help of a pump supply water and start drilling.

5. As soon as the first stage is passed, the machine is turned off, the crown is removed and the wall material is extracted from it. Reverse the order of disassembly of the ring drilling system.

6. The pipe is inserted into the hole and adjusted to the thickness of the wall. Use silicone sealant to fill the gap between the wall and plastic duct, and close the hole in the wall from the street with a decorative grille.

7. the air ventilator casing is screwed to the wall with dowel screws, level the unit and complete the fastening.

Once the installation is complete, set the parameters on the control panel: the airflow rate and the timer. The interface also has an LED to inform the user when the filter needs to be changed: normally not more often than once every 3 to 6 months – the interval depends on the degree of air pollution in the area where you live.

For optimal performance of the ventilator it is recommended to choose the filter according to your needs and the area in which your home is located. The unit is equipped with a SPPI10 charcoal filter, which helps to eliminate the smell of soot and smog and chemically cleans the air. If you want to protect against coarse dust, fluff, soot or other small matters such as plant spores and pollen, the G3 and F5 filters should be used as an alternative.

Rate this article
( No ratings yet )
John Techno

Greetings, everyone! I am John Techno, and my expedition in the realm of household appliances has been a thrilling adventure spanning over 30 years. What began as a curiosity about the mechanics of these everyday marvels transformed into a fulfilling career journey.

Home appliances. Televisions. Computers. Photo equipment. Reviews and tests. How to choose and buy.
Comments: 2
  1. Finley

    looks like a promising piece of medical equipment. I’m curious to know more about its features and functionality. Does it have different ventilation modes? How does it ensure patient safety? Is it suitable for both adults and children? Are there any accompanying accessories or software for monitoring? Any information on its reliability and cost would be greatly appreciated.

    Reply
  2. Michael Norris

    How does the AEROPAC SN ventilator from SIEGENIA effectively provide deep breaths? Can it be controlled remotely or is it manually operated?

    Reply
Add Comments